Right Angled M.2 NGFF NVMe M-Key to Up Angled PCI-E X1 X4 X8 X16 Socket Cable Graphics Card Extension Adapter PCI-Express for M2 2260 2280

1) M.2 to PCIe 4.0 Extender can convert the NVME slot on the motherboard into the PCIe slot, which is used to connect various PCIe X4 devices cards, and can also supports PCIe X8, X1 and X16 devices.

2) Please note that the actual data transfer speed of this PCIe X4 slot depends on the speed of the M.2 interface. PCIe 4.0 backwards compatible with PCIe 3.0/2.0/1.0 (note: cannot support PCIe 4.0)

3) Package includes a 12V/5V SATA power cord. Please note: 12V/5V power is available only when the cable is connected. When installing this adapter, please make sure the motherboard is powered off first.

4) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

5) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

6) The product included two PCBA and one cable. Built-in Flexible PVC Design: The internal use of copper lines instead of traditional copper lines can save space, facilitate bending and use, and is suitable for overall flattening. Then add an integrated PVC quilt around the wire, which makes the cable ultra flexible and durable, the cable is lightweighted, small size, perfect for your daily use.

M.2 NGFF NVMe M-Key to Up Angled PCI-E X1 X4 X8 X16 Socket Cable Graphics Card Extension Adapter PCI-Express for M2 2260 2280

1) M.2 to PCIe 4.0 Extender can convert the NVME slot on the motherboard into the PCIe slot, which is used to connect various PCIe X4 devices cards, and can also supports PCIe X8, X1 and X16 devices.

2) Please note that the actual data transfer speed of this PCIe X4 slot depends on the speed of the M.2 interface. PCIe 4.0 backwards compatible with PCIe 3.0/2.0/1.0 (note: cannot support PCIe 4.0)

3) Package includes a 12V/5V SATA power cord. Please note: 12V/5V power is available only when the cable is connected. When installing this adapter, please make sure the motherboard is powered off first.

4) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

5) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

6) The product included two PCBA and one cable. Built-in Flexible PVC Design: The internal use of copper lines instead of traditional copper lines can save space, facilitate bending and use, and is suitable for overall flattening. Then add an integrated PVC quilt around the wire, which makes the cable ultra flexible and durable, the cable is lightweighted, small size, perfect for your daily use.

USB 3.0 to mSATA 50Pin SSD 1.8" Micro SATA 7+9 16pin Adapter Add on Cards PCBA

The card is compliant with 1.8" micro SATA and MSATA specification.

It may be used in any application where 1.8"micro SATA SSD and MSATA drive

Packag included one cable and one card.

Support USB3.0 5Gbps data transfer rating.

NGFF NVME M-Key Riser Card to Dual Ports M.2 NGFF Key-M NVME SSD Adapter PCIE Packet Switch Compatible with NAS Industrial Control Motherboard

Build-in chipset ASM1182e, PCI express packet switch, 1 PCIe x1 Gen2 upstream port to 2 PCIe x 1 Gen2 downstream ports, enable users to extend PCIe ports on mother board or embedded system. PCIe interface of ASM1182e is PCIe Base SPEC 2.0 compliance.

Convert the NGFF NVME M-Key PCI-E interface of the motherboard or notebook to Dual Ports M.2 NGFF Key-M NVME interface,Compatible with NAS Industrial Control Motherboard.

Only suitable for the interface defined by M-Key NVME PCI-E and is not suitable for B-Key SATA single; Supports only 2230 SSD type Key M connector. No additional power required. Small body and stable performance.

Suitable for NAS, The two SSD can work at same time; Two SSD work at PCIe x1 Gen2 mode.

The riser card only changes the interface form of the NVME M-Key PCI-E module and does not change any performance of the module.

NGFF NVME M-Key Riser Card to E-Key WLAN Card & M.2 NGFF Key-M NVME SSD Adapter PCIE Packet Switch Compatible with NAS Industrial Control Motherboard

Build-in chipset ASM1182e, PCI express packet switch, 1 PCIe x1 Gen2 upstream port to 2 PCIe x 1 Gen2 downstream ports, enable users to extend PCIe ports on mother board or embedded system. PCIe interface of ASM1182e is PCIe Base SPEC 2.0 compliance.

Convert the NGFF NVME M-Key PCI-E interface of the motherboard or notebook to E-Key WLAN Card & M.2 NGFF Key-M NVME interface,Compatible with NAS Industrial Control Motherboard.

Only suitable for the interface defined by M-Key NVME PCI-E and is not suitable for B-Key SATA single; Supports only 2230 SSD type Key M connector. No additional power required. Small body and stable performance.

Suitable for NAS, The WLAN and SSD can work at same time; you can install the NAS system on SSD card; And connect networking by WLAN card.

The riser card only changes the interface form of the NVME M-Key PCI-E module and does not change any performance of the module.

Mini PCI-E Riser Card to NVME M.2 NGFF Key-M NVME SSD Adapter Compatible with NAS Industrial Control Motherboard

Convert the Mini PCI-E interface of the motherboard or notebook to M.2 NGFF Key-M NVME interface,Compatible with NAS Industrial Control Motherboard.

Only suitable for the interface defined by Mini PCI-E (with dual PCI-E and USB signal output) and is not suitable for MSATA.

Supports only 2230/2242/2260/2280 SSD type Key M connector. No additional power required. Small body and stable performance.

The riser card only changes the interface form of the Mini PCI-E module and does not change any performance of the module.

Allowed to read or write M.2 NVME SSD in Mini PCIe slot for Wifi card in Desktop or laptop; And Mini PCI-E only provide PCIe 1X Lane speed.

Mini PCI-E Riser Card to USB2.0 TF Card & M.2 NGFF Key-M NVME SSD Adapter Compatible with NAS Industrial Control Motherboard

Convert the Mini PCI-E interface of the motherboard or notebook to TF Card & M.2 NGFF Key-M NVME interface,Compatible with NAS Industrial Control Motherboard.

Only suitable for the interface defined by Mini PCI-E (with dual PCI-E and USB signal output) and is not suitable for MSATA.

The Mini PCI-E interface must support both PCI-E and USB signals;The TF card outputs from the USB signal;The SSD outputs from the PCI-E signal.

Supports only 2230/2242 SSD type Key M connector. No additional power required. Small body and stable performance.

TF Card Compatibility: MICRO SD/SDXC/TF card;Support 480Mbps Data rate max.

Suitable for NAS, The TF and SSD can work at same time; you can install the NAS system on a TF card; And then store data on the SSD.

The riser card only changes the interface form of the Mini PCI-E module and does not change any performance of the module.

NGFF USB 3.0 to Single Protocol Channel SATA Mode NGFF B/M-Key 2242 SSD External PCBA Case Conveter Adapter

The item included one PCBA and Case; Work for B/M-key SATA SSD(Not work for M-key NVME SSD); Compatible with 2242 size NGFF M.2 SSD; (The SSD is not included.)

Chipset inside; bridging the USB3.2 Gen1 to Serial SATA host interface with highly integrated SuperSpeed USB3.2 Gen1, High Speed USB2.0 and SATA1.5/3.0/6.0 Gbps ASMedia self -designed PHYs. Along with excellent compatibility with USB3.2 host and SATA device.(Not work for USB-to-PCIe mode.)

In USB-to-SATA mode, It supports SATA host in Gen3 speed. For SATA, it provides up to 6Gbps bandwidth. It has full backward compatibility for SATA Gen2/Gen1.

USB 3.0 to M.2(NGFF) SATA Storage adapter, providing one USB 3.0 connector on the host connection and one 67pin M.2 connector on the SSD storage devices connections;It supports a dynamically switching power state with NGFF/SATA/USB power management for power saving mode. It has an algorithm that can balance power consumption and performance.

Supports USB 3.1 GEN2 (10Gbps Super Speed Plus). It is compatible with USB 3.1 GEN1 (5Gbps Super Speed), USB 480Mbps High Speed, and Full Speed. It can work normally with auxiliary power. The Mass Storage transaction supports both Bulk Only Transfer (BOT) and USB Attached SCSI Protocol (UASP). For USB, it provides up to 10Gbps bandwidth.

USB 3.0 to Single Protocol Channel SATA Mode NGFF B/M-Key 2280 2260 2242 2230 SSD External PCBA Case Conveter Adapter ASM1153E Chipset

The item included one PCBA and Case; Work for B/M-key SATA SSD(Not work for M-key NVME SSD); Compatible with 2280 2260 2242 2230 size NGFF M.2 SSD; (The SSD is not included.)

ASM1153E Chipset inside; ASM1153E is the third generation single chip solution, bridging the USB3.2 Gen1 to Serial SATA host interface with highly integrated SuperSpeed USB3.2 Gen1, High Speed USB2.0 and SATA1.5/3.0/6.0 Gbps ASMedia self -designed PHYs. Along with excellent compatibility with USB3.2 host and SATA device, ASM1153E uses advanced process technology to optimize the chip power consumption.(Not work for USB-to-PCIe mode.)

In USB-to-SATA mode, It supports SATA host in Gen3 speed. For SATA, it provides up to 6Gbps bandwidth. It has full backward compatibility for SATA Gen2/Gen1.

USB 3.0 to M.2(NGFF) SATA Storage adapter, providing one USB 3.0 connector on the host connection and one 67pin M.2 connector on the SSD storage devices connections;It supports a dynamically switching power state with NGFF/SATA/USB power management for power saving mode. It has an algorithm that can balance power consumption and performance.

Supports USB 3.1 GEN2 (10Gbps Super Speed Plus). It is compatible with USB 3.1 GEN1 (5Gbps Super Speed), USB 480Mbps High Speed, and Full Speed. It can work normally with auxiliary power. The Mass Storage transaction supports both Bulk Only Transfer (BOT) and USB Attached SCSI Protocol (UASP). For USB, it provides up to 10Gbps bandwidth.

USB 3.0 to Single Protocol Channel NVME M-key M.2 & NGFF PCI-E 2242 2230 SSD External PCBA Case Conveter Adapter JMS583 Chipset

The item included one PCBA and Case; Work for M-key NVME SSD(Not work for B/M-key SATA SSD); Compatible with 2242 2230 size NVME M.2 SSD; (The SSD is not included.)

JMS583 Chipset inside; The JMS583 chipset is a USB (Universal Serial Bus) bridge that combines a USB device with both a PCI Express (PCIe) controller Via the PEDET interface of M.2 mechanical, the JMS583 can auto switch USB-to-PCIe mode, (Not work for USB-to-SATA mode.)

In USB-to-PCIe mode, It supports PCIe Gen3 x2. For PCIe, it provides up to 16Gbps bandwidth. It has full backward compatibility for PCIe Gen2/Gen1 and link width 1 lanes. The PCIe host supports NVM Express, which is an interface that allows a host driver to communicate with an NVMe SSD (Solid-State Disk). The NVMe driver is embedded in customized RAM/Rom/SPI Flash.

USB 3.0 to M.2(NGFF) NVME Storage adapter, providing one USB 3.0 connector on the host connection and one 67pin M.2 connector on the SSD storage devices connections; It supports a dynamically switching power state with NVMe/USB power management for power saving mode. It has an algorithm that can balance power consumption and performance.

Supports USB 3.1 GEN2 (10Gbps Super Speed Plus). It is compatible with USB 3.1 GEN1 (5Gbps Super Speed), USB 480Mbps High Speed, and Full Speed. It can work normally with auxiliary power. The Mass Storage transaction supports both Bulk Only Transfer (BOT) and USB Attached SCSI Protocol (UASP). For USB, it provides up to 10Gbps bandwidth.

NGFF NVME M-Key PCI Express to SATA 3.0 6Gbps 8 Ports Adapter Converter Hard Drive Extension Card 2280

It has 8x SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. With hot swap and hot plug capabilities, and power management functions;

NVMe M-Key to 8x SATA Adapter is designed for less SATA Ports but more spare M.2 NVMe Slots on Motherboard, This M.2 SATA Adapter will help you expand 8x regular SATA ports for storage appliances that use many SSDs and/or 3.5" hard drives.

Base on High Speed chip, more stable and wider compatible. Not support hot swaping. No additional software installation or setting required,The advanced Heatsink on Chipset will help the chipset working in lower temperature, avoid having any issues with reliability due to overheating.

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i; Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Fully compatible with SATA interface mechanical hard drives/SSD solid state hard drives/optical drives, etc. Support Windows 7/8/10, Windows Server 2008 R2/2012 R2/2016/2019/ Mac OS / Linux / FreeNAS / Synology and various NAS operating systems.

Input:NGFF NVME M-key PCI Express

Interface: 8 Ports * SATA3.0 interface

NGFF NVME M-Key PCI Express to SATA 3.0 6Gbps 6 Ports Adapter Converter Hard Drive Extension Card 2280

It has 6 SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. With hot swap and hot plug capabilities, and power management functions;

NVMe M-Key to 6 SATA Adapter is designed for less SATA Ports but more spare M.2 NVMe Slots on Motherboard, This M.2 SATA Adapter will help you expand 6x regular SATA ports for storage appliances that use many SSDs and/or 3.5" hard drives.

Base on High Speed chip, more stable and wider compatible. Not support hot swaping. No additional software installation or setting required,The advanced Heatsink on Chipset will help the chipset working in lower temperature, avoid having any issues with reliability due to overheating.

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i; Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Fully compatible with SATA interface mechanical hard drives/SSD solid state hard drives/optical drives, etc. Support Windows 7/8/10, Windows Server 2008 R2/2012 R2/2016/2019/ Mac OS / Linux / FreeNAS / Synology and various NAS operating systems.

Input:NGFF NVME M-key PCI Express

Interface: 6 Ports * SATA3.0 interface

NGFF NVME M-Key PCI Express to SATA 3.0 6Gbps 5 Ports Adapter Converter Hard Drive Extension Card JMB585 2280

It has 5 SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: JMB585

Interface: 5 * SATA3.0 interface

Applicable slot: NGFF Key-M PCI Express

M.2 NGFF NVMe M-Key Extender to PCI-E X1 X4 X8 X16 Graphics Card Riser Cable PCI-Express for M2 2260 2280

1) M.2 to PCIe 4.0 Extender can convert the NVME slot on the motherboard into the PCIe slot, which is used to connect various PCIe X4 devices cards, and can also supports PCIe X8, X1 and X16 devices.

2) Please note that the actual data transfer speed of this PCIe X4 slot depends on the speed of the M.2 interface. PCIe 4.0 backwards compatible with PCIe 3.0/2.0/1.0 (note: cannot support PCIe 4.0)

3) Package includes a 12V/5V SATA power cord. Please note: 12V/5V power is available only when the cable is connected. When installing this adapter, please make sure the motherboard is powered off first.

4) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

5) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

6) The product included two PCBA and one cable. Built-in Flexible PVC Design: The internal use of copper lines instead of traditional copper lines can save space, facilitate bending and use, and is suitable for overall flattening. Then add an integrated PVC quilt around the wire, which makes the cable ultra flexible and durable, the cable is lightweighted, small size, perfect for your daily use.

M.2 NGFF NVMe M-Key Right Angled Type 90 Degree to PCI-E X1 X4 X8 X16 Cable Graphics Card Extension Adapter PCI-Express for M2 2260 2280

1) M.2 to PCIe 4.0 Extender can convert the NVME slot on the motherboard into the PCIe slot, which is used to connect various PCIe X4 devices cards, and can also supports PCIe X8, X1 and X16 devices.

2) Please note that the actual data transfer speed of this PCIe X4 slot depends on the speed of the M.2 interface. PCIe 4.0 backwards compatible with PCIe 3.0/2.0/1.0 (note: cannot support PCIe 4.0)

3) Package includes a 12V/5V SATA power cord. Please note: 12V/5V power is available only when the cable is connected. When installing this adapter, please make sure the motherboard is powered off first.

4) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

5) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.The M-key plug is angled type; The angled type Allowing you to connect it to a female port, even if space around the port is limited.

6) The product included two PCBA and one cable. Built-in Flexible PVC Design: The internal use of copper lines instead of traditional copper lines can save space, facilitate bending and use, and is suitable for overall flattening. Then add an integrated PVC quilt around the wire, which makes the cable ultra flexible and durable, the cable is lightweighted, small size, perfect for your daily use.

M.2 NGFF NVMe M-Key Extender to PCI-E X1 X4 X8 X16 Graphics Card Riser Adapter PCI-Express for M2 2260 2280

1) M.2 to PCIe 4.0 Extender can convert the NVME slot on the motherboard into the PCIe slot, which is used to connect various PCIe X4 devices cards, and can also supports PCIe X8, X1 and X16 devices.

2) Please note that the actual data transfer speed of this PCIe X4 slot depends on the speed of the M.2 interface. PCIe 4.0 backwards compatible with PCIe 3.0/2.0/1.0 (note: cannot support PCIe 4.0)

3) Package includes a 12V/5V SATA power cord. Please note: 12V/5V power is available only when the cable is connected. When installing this adapter, please make sure the motherboard is powered off first.

4) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

5) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

Wireless NGFF Key-E WiFi Card to M.2 NGFF Key-M NVME SSD Adapter Compatible with Wifi6 WIFI7 Networking Card

Convert the M.2 KEY-M interface of the motherboard or notebook to M.2 KEY A+E or KEY-E interface,Compatible with Wifi6 WIFI7 Networking Card.

Supports only 2242/2260/2280 type Key M connector. No additional power required. Small body and stable performance.

Supports only the desktop PC and using on M.2 PCI-E KEY-M port.


Features:

1. This product only supports A+E key and E key M.2 NGFF PCIE protocol wireless network card type wireless module.

2. Some M.2 NGFF wireless network cards do not support AMD motherboards.

3. The riser card only changes the interface form of the wireless module and does not change any performance of the module.

4.This adapter does not support any A Key and E Key wireless network cards of CNVI protocol.

Wireless NGFF A/E-Key WiFi Card to M.2 NGFF Key-M NVME SSD Adapter for AX200 Wifi 6 Bluetooth 5.1

Convert the M.2 KEY-M interface of the motherboard or notebook to M.2 KEY A-E or KEY E interface.

Supports only 2260/2280 type Key M connector. No additional power required. Small body and stable performance.

Support wireless WIFI and Bluetooth.(need to connect the usb header)

Supports only the desktop PC and using on M.2 PCI-E KEY-M port.


Features:

1. This product only supports A+E key and E key M.2 NGFF PCIE protocol wireless network card type wireless module.

2. Some M.2 NGFF wireless network cards do not support AMD motherboards.

3. The riser card only changes the interface form of the wireless module and does not change any performance of the module.

4.This adapter does not support any A Key and E Key wireless network cards of CNVI protocol.

Slim Type 50Pin mSATA 3050 SSD 5x3cm to 2.5" SATA 3.0 22Pin Disk Adapter 6Gbps PCBA

Note: This adapter is only compatible with MSATA connector. Not compatible with 50mm Mini PCI-e SATA and Mini PCI-e PATA.

PCBA size: 57*46mm

Support 30 mm*50 mm size mSATA SSD converted into a standard 2.5" SATA6.0Gbps interface; The speed and other properties is not changed,only form conversion interface,because such transformation does not need through the integrated circuit chip.

This product can support 30 mm*26 mm size mSATA SSD if change the position of the location column in the adapter card. (You need to change it yourself).

Fully compatible with SATA interface mechanical hard drives/SSD solid state hard drives/optical drives, etc. Support Windows 7/8/10/11, Windows Server 2008 R2/2012 R2/2016/2019/ Mac OS / Linux / FreeNAS and various NAS operating systems.

SATA3.0 22pin interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

Low Profile 50Pin mSATA SSD 5x3cm to 2.5" SATA 3.0 22Pin Disk Drive Adapter PCBA

Note: This adapter is only compatible with MSATA connector. Not compatible with 50mm Mini PCI-e SATA and Mini PCI-e PATA.

PCBA size: 57*46mm

Support 30 mm*50 mm size mSATA SSD converted into a standard 2.5" SATA6.0Gbps interface; The speed and other properties is not changed,only form conversion interface,because such transformation does not need through the integrated circuit chip.

This product can support 30 mm*26 mm size mSATA SSD if change the position of the location column in the adapter card. (You need to change it yourself).

Fully compatible with SATA interface mechanical hard drives/SSD solid state hard drives/optical drives, etc. Support Windows 7/8/10/11, Windows Server 2008 R2/2012 R2/2016/2019/ Mac OS / Linux / FreeNAS and various NAS operating systems.

SATA3.0 22pin interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

2230 NGFF A+E-Key Male to NVME M-key Female Extension Adapter for Laptop Mainboard SSD 2230 2242

M.2 Key A+E: This key type is primarily used for wireless communication modules, such as Wi-Fi and Bluetooth cards. It features a single notch and supports PCIe interfaces.

M.2 Key M: Key M is the most versatile key type, supporting a wide range of functionalities, including storage devices, graphics cards, and other expansion cards. It has five or six notches and supports PCIe interfaces.

Support NGFF M.2 NVME key M 2230/2242 SSD card to key A + E 2230; Support for Windows 8/10/11.

The product included 3.2mm height NVME key M slot; Support PCI-E NVME M-key SSD extension only, It can't work for B/M-key SATA SSD. (Please check your SSD height first.)

NGFF M.2 Key-M to Key A+E Extension Cable NGFF M-Key to A+E Adapter Card Board, Extend the NVME from 2230 A+E socket to NVME 2230/2242.

PCI-E 4.0 X1 Lane to U.2 U.3 Kit SFF-8639 Host Adapter for Motherboard PM1735 NVMe PCIe SSD

1) The pci-e 1x card work for U.2 and U.3 SSD,not work for SATA/SAS SSD.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

2) This PCI Express card expands the PC by one U.2/U.3 SFF-8639 interface.It can be connected e.g. the U.2/U.3 U3 PM1735 Series SSD.

3) U.3 is a Tri-mode standard, building on the U.2 spec and using the same SFF-8639 connector. It combines SAS, SATA and NVMe support into a single controller. Where firmware support is available, U.3 can also support hot-swap between the different drives.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) U.3 drives are still backward compatible with U.2, though—the U.3 drives determine which host type it is inserted into (by using different combinations of HPT0 and HTP1 being open or ground), and configure the data lanes on power-up. U.3 drives can still act as dual-port NVMe drives in supporting systems.

6)　U.2 drives are not compatible with U.3 hosts.

PCI-E 4.0 x4 Lane PCI Express Host to U.3 U3 Kit SFF-8639 SSD Adapter for Motherboard Compatible with PM1735 NVMe PCIe SSD

1) The card only work for U.3 SSD, not work for U.2 SSD,not work for SATA/SAS SSD.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

2) This PCI Express card expands the PC by one U.3 SFF-8639 interface.It can be connected e.g. the U.3 U3 PM1735 Series SSD.

3) U.3 is a Tri-mode standard, building on the U.2 spec and using the same SFF-8639 connector. It combines SAS, SATA and NVMe support into a single controller. Where firmware support is available, U.3 can also support hot-swap between the different drives.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) U.3 drives are still backward compatible with U.2, though—the U.3 drives determine which host type it is inserted into (by using different combinations of HPT0 and HTP1 being open or ground), and configure the data lanes on power-up. U.3 drives can still act as dual-port NVMe drives in supporting systems.

6) The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

7) U.2 drives are not compatible with U.3 hosts.

PCI-E 4.0 x4 Lane PCI Express Host to U.2 U2 Kit SFF-8639 SSD Adapter Compatible with Motherboard NVMe PCIe SSD 750

1) The High Speed system referenced as PCI-E 4.0 standard, meets the 64Gbps specification.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

2) This PCI Express card expands the PC by one U.2 SFF-8639 interface.It can be connected e.g. the U.2 Series SSD.

3) A U.2 SSD is a high-performance data storage device designed to support the Peripheral Component Interconnect Express (PCIe) interface using a small form factor (SFF) connector that is also compatible with standard SAS and SATA-based spinning disks and solid-state drives (SSDs).

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) Compliant with PCI Express 4.0. No driver installation is required. Most of the latest operating systems support PCIe SSDs.

Features:

1.Nvme M key intel 750 SSD to PCIe X4 adapter.

2.The speed and other properties is not changed,only form conversion interface.

3.You can connect it to desktop.

4.Transparent to the operating system and does not require any software drivers.

5. The SATA 22pin on the card only for the power, no data transfer.

NVME M-Key 22x30mm to 22x80mm Angled Extension SSD Upgrade Adapter Compatible with MSI CLAW8 AI+ CLAW7 Gaming

If you have just collected your CLAW8/CLAW7 handheld games console and would like to expand its storage or have found yourself running out of space for your library of games.

We have managed to squeeze a full-fat 2280 M.2 SSD inside the new CLAW8/CLAW7 with our PCI-Express 4.0 x4 adapter.

Supports NVM Express (NVMe) 1.4 Data transfer rate up to 64Gbps,The M-key plug is angled type; The angled type Allowing you to connect it to a female port, even if space around the port is limited.

It’s an extremely easy process that will only take you about 20 minutes to do, and once you’re done you can enjoy up to 8TB of space.

Compatible with CLAW8/CLAW7 Gaming 2230 NVME to 2280 NVME extension, It can't convert NVME to SATA, also can't convert SATA to NVME.

Please put new 2280 SSD into the SSD box, Clone the system, Then replace the original 2230 SSD. (The SSD not include.)

NGFF NVME M-Key PCI Express to 9 Ports SATA 3.0 6Gbps Adapter Converter Hard Drive Extension Card 2280 for NAS Computer

It has 9 SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

NVMe to 9 SATA Adapter is designed for less SATA Ports but more spare M.2 NVMe Slots on Motherboard, This M.2 SATA Adapter will help you expand 9x regular SATA ports for storage appliances that use many SSDs and/or 3.5" hard drives

Base on High Speed chip, more stable and wider compatible. Not support hot swaping. No additional software installation or setting required,The advanced Heatsink on Chipset will help the chipset working in lower temperature, avoid having any issues with reliability due to overheating

NVME 9 SATA Adapter adopts dual-channel PCIe Gen3/Gen4 interface (M.2 M-Key 4x), SATA Ports Upload: total of 16Gbps transmission bandwidth, Download: Each of which supports 6Gbps.

Fully compatible with SATA interface mechanical hard drives/SSD solid state hard drives/optical drives, etc. Support Windows 7/8/10, Windows Server 2008 R2/2012 R2/2016/2019/ Mac OS / Linux / FreeNAS / Synology and various NAS operating systems.

Input:NGFF NVME M-key PCI Express

Interface: 9 Ports * SATA3.0 interface

PCI Express PCI-E 4X M.2 NGFF M-Key to 12Pin+16Pin Contacts SSD Convert Card for 2013 2014 2015 2016 2017 Mac A1493 A1502 A1465 A1466

It only supports the 16+12pin Mac SSD to NGFF M-key,Please make sure your NGFF M-key slot support the PCI-E 4x.

The adapter only work for M-key socket, It cannot convert to NGFF B-key or B+M key. It cannot convert to USB port or SATA port.

The SSD must be 16+12pin contacts.(see the photo, otherwise it cannot work)

Support Windows8/Windows10/Windows11,The SSD is not included.


Compatibility With:

2013 Mac Pro A1493 A1502 ( MD864 MD865 MD293 Md294) SSD

2013 Mac Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD

2013 Mac Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 MAC Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 MAC Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD

2015 MAC Pro retina A1502 A1398(MF839 MF840 MF841 MGXA2 MGXC2) SSD

2015 MAC Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878 SSD

NGFF B/M-key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure for Notebook Laptop

This adapter using JM20330 Serial ATA Bridge Chip.

Case Size:70mm x 10mm X 9.5mm

Used with NGFF B/M-key SSD ONLY!

It doesn't work for M-key and NVME SSD.


1) Check the BIOS and set to disk with IDE mode.

2) Set the disk jumper to master device.

3) If you can only recognize SATA disks smaller than 136GB, it means your motherboard does not support the IDE mode of LBA48.

50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case.

This adapter using JM20330 Serial ATA Bridge Chip.

Case Size:70mm x 10mm X 9.5mm

Used with MSATA(Mini PCI-E SATA) SSD ONLY!

1) Check the BIOS and set to disk with IDE mode.

2) Set the disk jumper to master device.

3) If you can only recognize SATA disks smaller than 136GB, it means your motherboard does not support the IDE mode of LBA48.

Mini PCI-E Wireless WWAN to USB Adapter Card with SIM Card Slot Module Testing Tools

The adapter cannot work if you only plug in the sim card.

The adapter has integrated with a SIM card slot and 1 or 2 WWAN antenna.

Mini PCI-E to USB Port 52PIN with SIM Slot Module

Ideal for testing the WWAN cards. You don't need to break or open your laptop to test your WWAN modules.

has integrated with a SIM card slot and 1 or 2 WWAN antenna It can work with most of WWAN modules.

Very easy to use. Don't need extra drivers. Just make sure you have installed the drivers software for your WWAN card.

It work with desktop computer and laptop computer with WINDOWS OS (XP VISTA).

With SIM/UIM card slot at the switch interface, it enables you to use 3G module directly when SIM card installed.

Note:

1) This adapter only with one PCBA converts signals, not include LTE module, antenna and SIM card.

2) It requires adapter + LTE module + SIM card to work together.

3) Telecom signal depend on the function of the LTE module.

4) You need to install your own LTE module driver to work.

5) The antenna with the LTE module needs to be connected to adapter.

6) It only supports LTE modules, not work for wireless network cards.

NGFF M.2 Key-B WWAN to USB 3.0 Adapter Riser Card w SIM Slot For 3G/4G/5G LTE Wireless Module Modem Card

The adapter can't work if you only plug in the sim card. Please insert WWAN card and SIM card together.

The adapter can't work for WLAN card without LTE moudle. Also can't work for SSD.

Ideal for testing the WWAN cards. You don't need to break or open your laptop to test your WWAN modules.

Has integrated with a SIM card slot and WWAN slot It can work with most of Key-B WWAN modules.
Very easy to use. Don't need extra drivers.

Just make sure you have installed the drivers software for your WWAN card.

Suitable for MU736/ME936/ ME906V, ME906C, ME906E, ME906J, Sierra Wireless Airprime EM7305 EM7345 EM7355 EM7430 and other NGFF interface communication module.

Note:

1) This adapter only with one PCBA converts signals, not include LTE module, antenna and SIM card.

2) It requires adapter + LTE module + SIM card to work together.

3) Telecom signal depend on the function of the LTE module.

4) You need to install your own LTE module driver to work.

5) The antenna with the LTE module needs to be connected to adapter.

6) It only supports LTE modules, not work for wireless network cards.

2230 NGFF A+E-Key Male to NVME M-key Female Extension Adapter for Laptop Mainboard SSD 2280

M.2 Key A+E: This key type is primarily used for wireless communication modules, such as Wi-Fi and Bluetooth cards. It features a single notch and supports PCIe and USB interfaces.

M.2 Key M: Key M is the most versatile key type, supporting a wide range of functionalities, including storage devices, graphics cards, and other expansion cards. It has five or six notches and supports PCIe interfaces.

Does not support SATA B+M-Key, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.

Support NGFF M.2 NVME key M 2230/2242/2260/2280 card-to-key A + E 2230; Support for Windows 8/10/11.(Note: SSD are not included.)

The product included two PCBA; Supports PCI-E 4.0 & NVME Data transfer rate up to 64Gbps; Support PCI-E NVME M-key SSD extension only, It can't work for B+M-key SATA SSD.

NGFF M.2 Key-M to Key A+E Extension adapter NGFF M-Key to A+E Adapter Card Board, Extend the NVME from 2230 A+E socket to NVME 2230/2240/2260/2280.

PCI Express PCI-E 3.0 Dual SATA to NGFF NVME MSATA M-Key B/M-key SSD Card Adapter 3in1

The three SSD Can work at same time.Transfer to the operating system and does not require any software drivers.

MSATA & NGFF SSD transfer data by SATA from Mainboard, NVME transfer data by PCI-E from Mainboard.

For MSATA SSD, You need to connect the SATA cable to Motherboard SATA Port.

For NGFF B/M-key or B-Key SSD, You need to connect the SATA cable to Motherboard SATA Port.

For NGFF M-key NVME SSD, You need to connect the PCI-E to Motherboard.

Powered from PCI-E port for three SSDs. no need extral power.

Support Type 2230/2242/2260/2280 type M.2 SSD and MSATA SSD.

System requirement:Motherboard: Z97 or later and Windows 10 or later.

2230 NGFF A+E-Key Male to NVME M-key Female Extension Cable for Laptop Mainboard SSD 2280.

M.2 Key A+E: This key type is primarily used for wireless communication modules, such as Wi-Fi and Bluetooth cards. It features a single notch and supports PCIe and USB interfaces.

M.2 Key M: Key M is the most versatile key type, supporting a wide range of functionalities, including storage devices, graphics cards, and other expansion cards. It has five or six notches and supports PCIe interfaces.

Support NGFF M.2 NVME key M 2230/2242/2260/2280 card-to-key A + E 2230; Support for Windows 8/10/11.

The product included two PCBA and one cable; Support PCI-E NVME M-key SSD extension only, It can't work for B/M-key SATA SSD.

NGFF M.2 Key-M to Key A+E Extension Cable NGFF M-Key to A+E Adapter Card Board, Extend the NVME from 2230 A+E socket to NVME 2230/2240/2260/2280.

B+M Key Socket 2 M.2 NGFF (SATA) SSD to 2.5 SATA Adapter Card Adapter with Black Metal Case

Does not support NVMe PCIE M-Key, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.

Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF SATA protocol SSD.; Note: SSD are not included.

Soket 2 B key M.2 NGFF SSD(SATA transfer mode) to 2.5" SATA adapter; Adopts Metal shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.

High Speed: Offers a throughput of up to 6Gbps when used with SATA host and device, Compliant with SATA Base Specification 3.0; Which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

Compatible Multi OS, Windows 7/ 8/ 8.1/ 10/ 11/ Linux/ MAC. Plug-and-play, no additional drivers required. Bus powered, does not need an external power supply.

The speed and other properties is not changed,only form conversion interface; You can connect it to desktop or laptop; Transfer to the operating system and does not require any software drivers.

M.2 Key E to PCIe X1 WiFi Bluetooth adapter with SMA Antenna Kits, work with NGFF M.2 WiFi module, as well as Coral TPU (M.2 Accelerator A+E key)

Wireless NGFF A/E-Key WiFi Card to PCI-E Express 1x Adapter for WLAN Wifi6 Wifi7 Bluetooth,Convert the PCI-E interface of the motherboard to M.2 KEY A-E or KEY E interface. Supports PCI-E 1X 4X 8X 16X connector. No additional power required. Small body and stable performance.

The WiFi signal goes through the PCIe X1 interface, and the Bluetooth signal goes through the USB interface (To enable Bluetooth: The USB cable needs to connect with the motherboard USB port). Supports only the desktop PC and using on PCI-E port.

Triple Band 2.4GHz 5GHz 6GHz Antenna: 6 dBi RP-SMA Male antenna.Compatible with BE200NGW, AX210NGW, AX200NGW, 9260NGW, 8265NGW, 8260NGW, 7265NGW, 7260NGW, and NGFF M.2 2230 Interface (Key E/A+E) WiFi module. Support WiFi 4/5/6/6E/7, Bluetooth 4.0/4.1/4.2/5.0/5.1/5.2/5.3/5.4

Features:

1. This product only supports A+E key and E key M.2 NGFF PCIE protocol wireless network card type wireless module.

2. Some M.2 NGFF wireless network cards do not support AMD motherboards. OS compatibility: DOS/Windows/Linux/Mac OS (Based on your WiFi module Compatibility).

3. The riser card only changes the interface form of the wireless module and does not change any performance of the module.It is only a signal converter and does not need a driver. But you may need to install a driver for your M.2 WiFi module.Pre-installed 12cm regular-profile bracket.

4.This adapter does not support any A Key and E Key CNVIwireless network cards. To be noted: can not work with M.2 CNVio2/CNVio interface WiFi module, such as intel AX211NGW, AX201NGW, AC 9560NGW, AC 9462NGW, AC 9461NGW, etc. Not support Mini PCIe WiFi module.

7mm 2.5" SATA 22pin to Apple A1425 A1398 MC975 MC976 MD212 MD213 ME662 ME664 ME665 SSD hard disk case Enclosure White

The hard disk case is 7mm height,

There is no hard disk included at the case.


Can work for belowing SSD:

APPLE MACBOOK PRO RETINA

A1425 A1398 MC975 MC976 MD212 MD213 ME662 ME664 ME665

Note:

1. The SSD must be 17+7pin contacts.(see belowing photo,otherwise it cannot work)

2. it can't work for 2010 2011 2013 2014 2015 macbook SSD.

NGFF M-Key NVME Male to Female Extension PCI Express Cable 30cm Right Angled Type 90 Degree PCI-E 4.0 for Mainboard SSD 2230/2242/2260/2280

The product included two PCBA and one cable. The cable is 30cm length.

Support NVME to NVME, or SATA to SATA extension only, it can't convert NVME to SATA, also can't convert SATA to NVME.

Extend the NVME from 2230/2242/2260/2280 socket to 2230/2240/2260/2280/22110 cable.

Built-in Flexible PVC Design: The internal use of copper lines instead of traditional copper lines can save space, facilitate bending and use, and is suitable for overall flattening. Then add an integrated PVC quilt around the wire, which makes the cable ultra flexible and durable, the cable is lightweighted, small size, perfect for your daily use.

Supports NVM Express (NVMe) 1.4 Data transfer rate up to 64Gbps,,Supports NGFF SATA Data transfer rate up to 6Gbps.

The M-key plug is angled type; The angled type Allowing you to connect it to a female port, even if space around the port is limited.

Mini PCI-E PCI Express to Slimline SFF-8654 SATA 3.0 Four Ports Adapter Converter 6Gbps Disk Extension Card for SSD

The Slimline SFF-8654 4x connectors are internal small form factor for 4 SATA connectors and cables optimized for the client and market. (The adapter not work for any PCI-E/SAS device.)

Slimline SFF-8654 can convert four SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.The slimline to 4 SATA not include.

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: ASMedia ASM1064

Interface: Slimline SFF-8654

Applicable slot: MINI PCI-E (mSATA is not supported)

Mini PCI-E PCI Express to Oculink SFF-8612 SFF-8611 SATA 3.0 Four Ports Adapter Converter 6Gbps Disk Extension Card for SSD

The Oculink 4x connectors are internal and external small form factor for 4 SATA connectors and cables optimized for the client and market. (The adapter not work for any PCI-E/SAS device.)

Oculink can convert four SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. (The oculink to 4 SATA not include.)

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: ASMedia ASM1064

Interface: Oculink SFF-8612

Applicable slot: MINI PCI-E (mSATA is not supported)

10Gbps USB-C Type-C to NGFF Key B+M SATA 6Gbps 5 Ports Adapter Converter PM Port Multiplier Selector

Dual chipset at the adapter, JMB575+JMS580.

JMB575 is a single chip solution. It integrated 5 independent SATA channels and a micro-processor. Supports cascaded mode which enables maximum 5 drives connected to one host.

JMS580 is a USB 3.1 Gen 2 to SATA 6Gb/s bridge controller between USB host and SATA storage device. TheUSB 3.1 Gen 2 interface offers data transfer speed up to 10Gbps, doubling the USB 3.1 Gen 1 data rate.

With proper setting, the chip can be configured as Type-C to 5 ports SATA 6Gbps Port.

Key Features:

Complies with Serial ATA 6Gb/s Electrical Specification 3.2;

Complies with USB 3.1 Specification Revision 1.0, USB BOT Specification;

Support 5 port SATA 6Gbps interface; Supports BIST and loopback mode;

Support command-based and FIS-based switching; Support PM aware and non-PM aware host;

Main control chip: JMB575+JMS580

Interface: 5 x SATA3.0 interface

NGFF Key B+M to SATA 3.0 6Gbps 5 Ports Adapter Converter Port Select JMB575

JMB575 is a single chip solution. It integrated 5 independent SATA channels and a micro-processor.

With proper setting, the chip can be configured as 1 to 5 ports SATA 6Gbps Port.

JMB575 supports cascaded mode which enables maximum 5 drives connected to one host.


Key Features

Comply with Serial ATA Port Multi Spec. Revision 1.2

Comply with Serial ATA Port Select Spec. Revision 1.0

Support 5 port SATA 6Gbps interface

Supports BIST and loopback mode

Support command-based and FIS-based switching

Support PM aware and non-PM aware host

Main control chip: JMB575

Interface: 5 * SATA3.0 interface

Applicable slot: NGFF Key B+M

NGFF M-Key NVME Male to Female Extension PCI Express Cable 40cm PCI-E 4.0 for Mainboard SSD 2280

The product included two PCBA and one cable. The cable is 30cm length.

Support NVME to NVME, or SATA to SATA extension only, it can't convert NVME to SATA, also can't convert SATA to NVME.

Extend the NVME from 2230/2242/2260/2280 socket to 2230/2240/2260/2280/22110 cable.

Built-in Flexible PVC Design: The internal use of copper lines instead of traditional copper lines can save space, facilitate bending and use, and is suitable for overall flattening. Then add an integrated PVC quilt around the wire, which makes the cable ultra flexible and durable, the cable is lightweighted, small size, perfect for your daily use.

Supports NVM Express (NVMe) 1.4 Data transfer rate up to 64Gbps,,Supports NGFF SATA Data transfer rate up to 6Gbps.

12+16pin 2014 2015 Macbook to M.2 NGFF M-Key SSD Convert Card for A1493 A1502 A1465 A1466

The adapter can covert the NGFF M-key SSD to the 12+16pin 2014 2015 Macbook SSD.

Note: The Nvme SSD only work for Mac OS HiSierra.

Compatibility With:

2013 Macbook Pro A1493 A1502 ( MD864 MD865 MD293 Md294) SSD

2013 MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD

2013 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD

2015 MacBook Pro retina A1502 A1398(MF839 MF840 MF841 MGXA2 MGXC2) SSD

2015 MacBook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878 SSD

Note: The adapter only work for M-key SSD, cannot work for B-key or B/M-key socket.

Specifications and features:

1.Support Following M.2 (NGFF) PCI-e SSD:

1) Samsung XP941 (MZHPU128HCGM MZHPU256HCGL MZHPU512HCGL)

2) Samsung SM951 PCIE-AHCI (MZHPV128HDGM MZHPV256HDGL MZHPV512HDGL)

3) Kingston SHPM2280P2/ 240G/ 480G

4) The other PCIE-NVME SSD

2. can replace SSD modules from following:

1) Samsung MZ-JPU128T / 0A2, MZ-JPU256T / 0A2, MZ-JPU512T / 0A2, MZ-KPU1TOT / 0A2, MZ-JPV1280,

2) Sandisk SD6PQ4M-128G, SD6PQ4M-256G

NGFF B+M Key NVME M-Key 22x30mm to 22x42mm Male to Female Extension Adapter for 2230 2242 SSD

Support 2230 NVME to 2242 NVME extension, or 2230 SATA/NGFF to 2242 SATA/NGFF extension.

It can't convert NVME to SATA, also can't convert SATA to NVME.

Extend the SSD from 2230 socket to 2242 SSD.

PCB Card only. (not include SSD)

Work for 2230 to 2242 SSD , Compatible with Legion Go ThinkPad X270 X280 t470 t480 L480 T580 serials.

30x50mm MSATA to Micro SD T-Flash TF Card Rearder Adapter Embedded for Industrial Mobile SSD

This adapter card can convert TF (micro SD) card into SSD with MSATA interface.(Not work for MINI PCI-E port.)

Application fields Industrial computer motherboard, industrial computer, tablet computer, soft routing, POS machine, hard disk video recorder.

Chipset sage s682 scheme,Compatible with DOS, wince, WIN98/XP/Vista/NT,win7/8/10/11 and Linux operating systems.

The SSD can be flexibly plugged in and out for equivalent industrial purposes, and the TF can be used as a mobile hard disk to realize the flexible movement of data storage.

Compatible with SATA GEN1 and Gen2, with transmission rates of 1.5gbps and 3.0gbps respectively. The data transmission rate reaches 150mb/s and 300mb/s respectively. TF supports high-speed cards.

It supports plug and play with BIOS and operating system, and can be used without any driver. It is recommended to cold plug after shutdown to realize the mobile storage of data. Do not hot plug TF and MSATA.

Size: compatible with MSATA 50mm SSD size. It can be used on desktop and notebook.

Note:

Before using this product, please insert the TF card into the corresponding TF socket, and then insert it into the msata slot in the off state. After power on, the LED flashes, indicating that the data reading of TF card is normal.

After initial use or TF card configuration change, the TF card needs to be initialized and formatted. After formatting, you can perform any data operation on the TF card.

M2 NGFF B-Key to Micro SD T-Flash TF Card Rearder B+M Key Adapter Embedded for Industrial Mobile SSD

This adapter card can convert TF (micro SD) card into SSD with ngff (m.2) interface.

Application fields Industrial computer motherboard, industrial computer, tablet computer, soft routing, POS machine, hard disk video recorder.

Chipset sage s682 scheme,Compatible with DOS, wince, WIN98/XP/Vista/NT,win7/8/10/11 and Linux operating systems.

The SSD can be flexibly plugged in and out for equivalent industrial purposes, and the TF can be used as a mobile hard disk to realize the flexible movement of data storage.

Compatible with SATA GEN1 and Gen2, with transmission rates of 1.5gbps and 3.0gbps respectively. The data transmission rate reaches 150mb/s and 300mb/s respectively. TF supports high-speed cards.

It supports plug and play with BIOS and operating system, and can be used without any driver. It is recommended to cold plug after shutdown to realize the mobile storage of data. Do not hot plug TF and ngff (m.2).

Size: compatible with ngff (m.2) 2242mm SSD size. It can be used on desktop and notebook.

Note:

Before using this product, please insert the TF card into the corresponding TF socket, and then insert it into the ngff (m.2) slot in the off state. After power on, the LED flashes, indicating that the data reading of TF card is normal.

After initial use or TF card configuration change, the TF card needs to be initialized and formatted. After formatting, you can perform any data operation on the TF card.

NGFF M-Key NVME Male to Female Extension Cable 40cm with SFF-8654 Connector for Mainboard SSD

The product included two PCBA and one cable. The cable is 40cm length and included SFF-8654 Connector.

The two PCBA and one cable must be connect together.

Support NVME extension only, it can't convert NVME to SFF-8654, also can't convert SFF-8654 to NVME.

Extend the NVME from 2242/2260/2280 socket to 2230/2240/2260/2280/22110 cable.

NGFF NVME M-Key 22x42mm to 22x80mm Male to Female Extension SSD Adapter Compatible with Legion Go Game Boy

If you have just collected your Legion Go handheld games console and would like to expand its storage or have found yourself running out of space for your library of games.

We have managed to squeeze a full-fat 2280 M.2 SSD inside the new Legion Go with our PCI-Express4.0 x4 adapter.

It’s an extremely easy process that will only take you about 20 minutes to do, and once you’re done you can enjoy up to 8TB of space.

Compatible with Legion Go 2242 NVME to 2280 NVME extension, It can't convert NVME to SATA, also can't convert SATA to NVME.

Please put new 2280 SSD into the SSD box, Clone the system, Then replace the original 2242 SSD.

The replacement SSD can't be fixed by scew. The SSD height must be 2mm or lower. Otherwise you may not close the back cover.

Mini PCI-E mSATA SSD to 2.5" SATA Hard Disk Enclosure Case Converter Adapter

It can be connected to an MSATA SSD as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

1. The adapter can work for 50*30mm size MSATA SSD.

2. Not compatible with MINI PCI-E SATA SSD，eg. Brand ASUS EeePC SSD

3. Not compatible with M.2 NGFF SSD(B-key or M-key)

4. Support WindowXP/2003/Vista/7/8/10/11, Linux , Mac systems

5. Standard input SATA-22P(15+7) to 50pin MSATA

2pcs/lot M2 NGFF NVME M.2 Extended Adapter Transfer 2230 2242 2260 2280 Change to Long Size SSD

Support 2230 to 2242/2260/2280 NVME/SATA/NGFF extension.

Support 2242 to 2260/2280 NVME/SATA/NGFF extension.

Support 2260 to 2280 NVME/SATA/NGFF extension.

It can't convert NVME to SATA, also can't convert SATA to NVME.

2pcs PCB Card only. (not include SSD)

Work for 2230 to 2242 SSD , Compatible with Legion Go ThinkPad X270 X280 t470 t480 L480 T580 serials.

2.5inch SATA 22Pin to 2010 2011 2012 Mac Air Pro Retina SSD 12+6Pin 17+7Pin A1425 A1398 MC975 MC976 Case Enclosure

The 12+6pin and 17+7pin SSD can't work at same time. You need use the switch to convert it.

SATA to MAC Storage adapter, providing one 7+15pin connector on the host connection and two 12+6pin 17+7pin connector on the SSD storage devices connections. When assembled, it can operate in a variety of operating systems.

About the disk format: MAC format SSD only can be read at MAC-OS, You can format it as FAT/NTFS at "Disk Management" for Windows OS.

Can work for all 12+6pin and 17+7pin SSD.(from 2011 to 2013 early MAC SSD)

The SSD not include at the package.

SATA 22P 7+15 to MSATA Mini PCI-E PCBA Assembly for UX31 UX21 XM11 SSD Solid State Disk

The SSD must be 12+6pin and 24x94mm length. (other SSD not work).

It has SATA3.0 interfaces, which can be connected to 12+6pin SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions.

Full Complaint with SATA revistion3.0 and DC 3.3 Volt mini PCI-e SATA module SSD support.

Mini PCI-e SSD 52pin connector Support for: Eee Slate EP121 UX31 UX21 W501 W500 EP121 SSD.

NGFF E-Key A+E Key 22x30mm to 22x42mm Male to Female Extension Adapter for Wireless Card

Support 2230 E-Key or A+E-Key to 2242 extension, Support WIFI6 WIFI7 Wireless Card.

It is E-key pinout,Not work for B-key M-key or A-key, not work for mini-pcie.

The extend adapter card to protect the contact of the wireless card.

PCB Card only. (not include Wireless Card)

NGFF B Key 22x30mm to 22x42mm Male to Female Extension Adapter for 2230 SSD LTE Card

Support 2230 B-key or B+M-key to 2242 extension, Support 2230 SSD or LTE card.

Support MU736/ME936/ME906/EM7305 EM7345/EM7355/EM7430 Serial B-key LTE/4G Card.

It can't convert NVME to SATA, also can't convert SATA to NVME. Extend the SSD from 2230 socket to 2242 SSD.

PCB Card only. (not include SSD or LTE Card)

PCBA 12+6pin SSD HDD to SATA 22Pin Hard Disk Cartridge Drive

The PCBA can convert the Macbook Air SSD to Standard 22 Pin SATA port.

Compatibility:

Only use for

APPLE MacBook AIR A1370 A1369 MC503 MC504 MC505 MC506

APPLE MacBook AIR A1370 A1369 MC968 MC969 MC965 MC966

The hard disk must be 6+12pin

The SSD hard disk is not included.

Note:

The SSD must be 12+6pin contacts.(see belowing photo,otherwise it cannot work)

NVME M-Key 22x30mm to 22x80mm NGFF Extension SSD Upgrade Adapter Compatible with ROG Flow X13 Gamings Laptop

If you have just collected your Laptop handheld games console and would like to expand its storage or have found yourself running out of space for your library of games.

We have managed to squeeze a full-fat 2280 M.2 SSD inside the new ROG Ally with our PCI-Express4.0 x4 adapter.

It’s an extremely easy process that will only take you about 20 minutes to do, and once you’re done you can enjoy up to 8TB of space.

Compatible with ROG 2021-2023 Flow X13 Gaming 2230 NVME to 2280 NVME extension, It can't convert NVME to SATA, also can't convert SATA to NVME.

Please put new 2280 SSD into the SSD box, Clone the system, Then replace the original 2230 SSD.

The replacement SSD can't be fixed by scew. You need to use the double-sided tape to do it.

NVME M-Key 22x30mm to 22x80mm NGFF Extension SSD Upgrade Adapter Compatible with ROG Ally Gaming

If you have just collected your Ally handheld games console and would like to expand its storage or have found yourself running out of space for your library of games.

We have managed to squeeze a full-fat 2280 M.2 SSD inside the new ROG Ally with our PCI-Express 4.0 x4 adapter.

It’s an extremely easy process that will only take you about 20 minutes to do, and once you’re done you can enjoy up to 8TB of space.

Compatible with ROG Ally Gaming 2230 NVME to 2280 NVME extension, It can't convert NVME to SATA, also can't convert SATA to NVME.

Please put new 2280 SSD into the SSD box, Clone the system, Then replace the original 2230 SSD.

NVME M-Key 22x30mm to 22x80mm Angled Extension SSD Upgrade Adapter Compatible with ROG Ally Gaming

If you have just collected your Ally handheld games console and would like to expand its storage or have found yourself running out of space for your library of games.

We have managed to squeeze a full-fat 2280 M.2 SSD inside the new ROG Ally with our PCI-Express 4.0 x4 adapter.

It’s an extremely easy process that will only take you about 20 minutes to do, and once you’re done you can enjoy up to 8TB of space.

Compatible with ROG Ally Gaming 2230 NVME to 2280 NVME extension, It can't convert NVME to SATA, also can't convert SATA to NVME.

Please put new 2280 SSD into the SSD box, Clone the system, Then replace the original 2230 SSD.

NGFF M-key NVME AHCI SSD to PCI-E 3.0 16x x16 Vertical Adapter

with 18-20cm PCI-E 16X Cable Male to Female Extension

M key M.2 NGFF SSD to PCIe X16 adapter.Support Type 2230/2242/2260/2280 type M.2 Card dimension.

The speed and other properties is not changed,only form conversion interface. Transparent to the operating system and does not require any software drivers.

System requirement: Z97 or later Motherboard+Windows 10 OS or later

NGFF M-key NVME AHCI SSD to PCI-E 3.0 16x x4 Adapter for XP941 SM951 PM951 A110 m6e 960 EVO SSD

Features:

1.M key M.2 NGFF SSD to PCIe X4 adapter.

2.The speed and other properties is not changed,only form conversion interface.

3.Support Type 2230/2242/2260/2280 type M.2 Card dimension.

4.Transparent to the operating system and does not require any software drivers.

System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later

NGFF Key A+E PCI Express Male to Female Right Angled 90 Degree Low Profile Adapter Extension Card Riser

The angled type adapter Allowing you to connect it to a female port, even if space around the port is limited.

KEY A Risers Board;PCIE3.0/4.0 Speed.

Our adapter supports NGFF key A, ensuring faster data transfer speeds and reliable performances.

This Key A+E Risers Converter Adapter is the choice for wireless card, gamers, and professionals.

It is widely used in PC computers, industrial computers, consumer electronic devices,Support WINXP/WIN7/8/10/11.

Four SATA NGFF Key B+M SSD to PCI-E 1x Motherboard Desktop Adapter Converter SSD Card ASM1064 2280

It has PCI-E 1x interfaces, which can be connected to four SSDs, and supports desktop motherboard PCI-E port.

It has four SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

The PCI-E slot is 1x and also support 4x/8x/16x.

Supoort SATA NGFF Key B+M SSD with 2230/2242/2260/2280.

Main control chipset: ASM1064

Applicable slot: NGFF Key B+M SSD to PCI-E Host.

Mini PCI-E PCI Express & NGFF A+E Key to SATA 3.0 Four Ports Adapter Cable 6Gbps Hard Drive Extension Card for SSD

It has four SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

The adapter supports from Mini PCI-E PCI Express or NGFF A+E Key host to 4SATA target disk.

Applicable slot1: MINI PCI-E (mSATA is not supported)

Applicable slot2: NGFF A+E key (B/M-Key is not supported)

Main control chip: ASMedia ASM1064

Interface: 4 * SATA3.0 interface

Package included: Mini PCIe board*1, NGFF A+E board*1, Flat cable*1, Main SATA board*1

Dual MSATA NGFF B+M SSD Card JBOD Raid0 Span Bridge to 2.5inch SATA Combo HDD Disk Drive Enclosure

JBOD is short for Just a Bunch of Disks or Just a Bunch of Drives, which is a storage structure including multiple disk drives within one single storage enclosure. It refers to the hard disks on the computer that haven’t been configured in terms of RAID (Redundant Arrays of Independent Disks).

JBOD drives are individual drives, which means that drives in JBOD enclosure can function individually. And they configured to act as RAID under the help of correct host system technology.

Support the MSATA and NGFF B+M (SATA mode) SSD.

You can connect it to desktop or laptop.

Dual MSATA NGFF B+M SSD can work at one SSD with JOBD Raid Mode.

Mini PCI-E PCI Express to SATA 3.0 Four Ports Adapter Converter 6Gbps Hard Drive Extension Card for SSD

It has four SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: ASMedia ASM1064

Interface: 4 * SATA3.0 interface

Applicable slot: MINI PCI-E (mSATA is not supported)

Mini PCI-E PCI Express to SATA 3.0 Dual Ports Adapter Converter Hard Drive Extension Card

It has two SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: ASMedia ASM1061

Interface: 2 * SATA3.0 interface

Applicable slot: MINI PCI-E (mSATA is not supported)

Dual SATA NGFF Key B+M SSD to PCI-E 1x Motherboard Desktop Adapter Converter SSD Card JMB582 2280

It has PCI-E 1x interfaces, which can be connected to two SSDs, and supports desktop motherboard PCI-E port.

The PCI-E slot is 1x and also support 4x/8x/16x..

Supoort SATA NGFF Key B+M SSD with 2230/2242/2260/2280.

Main control chipset: JMB582

Applicable slot: NGFF Key B+M SSD to PCI-E Host.

SATA 3.0 6Gbps 1 to 5 Splitter Ports HUB Adapter Converter PM Multiplier Port Selector JMB575

Your SATA host port must be port Multiplier / Selector mode. Otherwise can't work.

The belowing chipset SATA port can be supported: JMS582 JMB585 ASM1061 ASM1064 ASM1166.

JMB575 is a single chip solution. It integrated 5 independent SATA channels and a micro-processor.

With proper setting, the chip can be configured as 1 to 5 ports SATA 6Gbps Port.

JMB575 supports cascaded mode which enables maximum 5 drives connected to one host.


Key Features

Comply with Serial ATA Port Multi Spec. Revision 1.2

Comply with Serial ATA Port Select Spec. Revision 1.0

Support 5 port SATA 6Gbps interface

Supports BIST and loopback mode

Support command-based and FIS-based switching

Support PM aware and non-PM aware host

Main control chip: JMB575

Interface: 5 * SATA3.0 interface

Applicable slot: SATA port with PM function.

SATA NGFF Key B+M SSD to NVME M-key Motherboard Desktop Adapter Converter SSD Card JMB582 2280

It has NGFF Key B+M interfaces, which can be connected to an SSD, and supports desktop motherboard PCI-E NVME M-key port.

The NGFF Key B+M slot is 6mm height and can't fit in laptop M-key slot.

Supoort SATA NGFF Key B+M SSD with 2230/2242/2260/2280.

PCBA dimension: 22*110mm, Main control chipset: JMB582

Applicable slot: NGFF Key B+M SSD to M-Key Host.

Dual NGFF B+M-Key M.2 SSD Card JBOD Raid0 Span Bridge to USB3.0 Type-C USB-C 2.5inch SATA Combo Enclosure

JBOD is short for Just a Bunch of Disks or Just a Bunch of Drives, which is a storage structure including multiple disk drives within one single storage enclosure. It refers to the hard disks on the computer that haven’t been configured in terms of RAID (Redundant Arrays of Independent Disks).

JBOD drives are individual drives, which means that drives in JBOD enclosure can function individually. And they configured to act as RAID under the help of correct host system technology.

Support NGFF B+M-Key M.2 SSD.Not work for M-key NVME PCI-E SSD.

You can connect it to desktop or laptop. Dual NGFF B+M-Key M.2 can work at one SSD with JOBD Raid Mode.

Package included one USB3.0 Type-C Enclosure and one SATA to Dual NGFF adapter.

Dual NGFF B+M Key M.2 SSD Card JBOD Raid0 Span Bridge to 2.5inch SATA Combo HDD Disk Drive Enclosure

JBOD is short for Just a Bunch of Disks or Just a Bunch of Drives, which is a storage structure including multiple disk drives within one single storage enclosure. It refers to the hard disks on the computer that haven’t been configured in terms of RAID (Redundant Arrays of Independent Disks).

JBOD drives are individual drives, which means that drives in JBOD enclosure can function individually. And they configured to act as RAID under the help of correct host system technology.

Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF (SATA mode) SSD.

You can connect it to desktop or laptop.

Dual NGFF SSD can work at one SSD with JOBD Raid Mode.

Transparent to the operating system and does not require any software drivers.

Only supports B or B/M KEY SOCKET 2 SATA transmission protocol M.2 NGFF SSD!

It dose not support NVME M-key SSD. Not work for NVME SSD to SATA/USB.

Dual MSATA Mini-SATA SSD Card JBOD Raid0 Span Bridge to USB3.0 Type-C USB-C 2.5inch SATA Combo Enclosure

JBOD is short for Just a Bunch of Disks or Just a Bunch of Drives, which is a storage structure including multiple disk drives within one single storage enclosure. It refers to the hard disks on the computer that haven’t been configured in terms of RAID (Redundant Arrays of Independent Disks).

JBOD drives are individual drives, which means that drives in JBOD enclosure can function individually. And they configured to act as RAID under the help of correct host system technology.

Support the MSATA Mini-SATA (SATA mode) SSD.You can connect it to desktop or laptop.

Dual MSATA SSD can work at one SSD with JOBD Raid Mode.

Package included one USB3.0 Type-C Enclosure and one SATA to Dual MSATA adapter.

Dual MSATA Mini-SATA SSD Card JBOD Raid0 Span Bridge to 2.5inch SATA Combo HDD Disk Drive Enclosure

JBOD is short for Just a Bunch of Disks or Just a Bunch of Drives, which is a storage structure including multiple disk drives within one single storage enclosure. It refers to the hard disks on the computer that haven’t been configured in terms of RAID (Redundant Arrays of Independent Disks).

JBOD drives are individual drives, which means that drives in JBOD enclosure can function individually. And they configured to act as RAID under the help of correct host system technology.

Support the MSATA Mini-SATA (SATA mode) SSD.

You can connect it to desktop or laptop.

Dual MSATA SSD can work at one SSD with JOBD Raid Mode.

M.2 NGFF M-Key NVME SSD Convert Card for 2016 2017 13" Macbook Pro A1708

The adapter can covert the 2230/2242 NVME SSD to the Macbook Pro A1708 SSD.

Compatibility With:2016/2017 MacBook Pro A1708.

Note: The adapter only work for 2230/2242 NVME SSD.

Package included: Convert Card, Screws Nut Screwdrivers (T5, P5)

2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF mSATA SSD to SATA 3.0 III Adapter Converter PCBA

2.5" SATA SSD Form Factor : 98 x 65.5mm

M.2 (NGFF) mSATA to SATA III Module

Build in Mini PCI-e 52pin Female connector

Build in M.2 (NGFF) B key Female connector

Insert both M.2 mSATA SSD on the PCBA,M.2 SSD is the first priority. mSATA won't work.

Support SATA Reversion 3.2

PCI Express M.2 Spec. Revision 0.7, Version 1.0

PCI Express Mini Card Electromechanical Spec. 1.2

PWM synchronous buck converter Power IC

3A maximum output current

Short circuit protection

In-rush current suppression

Thermal shutdown protection

ESD HBM (Human Body Mode)/2KV

Note:

1. the MSATA and NGFF SSD cannot work at same time.

2.The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket.

NGFF Key B+M PCI Express to SATA 3.0 6Gbps Dual Ports Vertical Horizontal Adapter Converter Hard Drive Extension Card JMB582 2280

It has two SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: JMB582

Interface: 2 * SATA3.0 interface Vertical+Horizontal Type

Applicable slot: NGFF Key B+M PCI Express

NGFF Key B+M PCI Express to SATA 3.0 6Gbps Dual Ports Adapter Converter Hard Drive Extension Card JMB582 2280

It has two SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: JMB582

Interface: 2 * SATA3.0 interface Vertical Type

Applicable slot: NGFF Key B+M PCI Express

NGFF Key B+M PCI Express to SATA 3.0 6Gbps Dual Ports Adapter Converter Hard Drive Extension Card JMB582 2230 2242 2260 2280

It has two SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: JMB582

Interface: 2 * SATA3.0 interface Vertical Type

Applicable slot: NGFF Key B+M PCI Express 2230 2242 2260 2280

NGFF Key A+E PCI Express to SATA 3.0 6Gbps Dual Ports Adapter Converter Hard Drive Extension Card JMB582

It has two SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

With hot swap and hot plug capabilities, and power management functions;

Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i;

Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

Main control chip: JMB582

Interface: 2 * SATA3.0 interface

Applicable slot: NGFF Key A+E PCI Express

This unit is an mSATA SSD to a 1.8 micro SATA 16pin Adapter Card.

The card is compliant with 1.8" micro SATA specification.

It may be used in any application where 1.8"micro SATA SSD drive may be used:

Intel mSATA series SSD and compatible Storage Device

Samsung PM800 series SSD and compatible Storage Device

Toshiba mSATA SSD and compatible Storage Device

M.2 NGFF PCI-E 2 LANE to 50mm Mini-PCIE mSATA 18+8 SSD Hard Disk PCBA

The item doesn't include Msata SSD

Build in Mini PCI-e 52pin Female connector

Connected mSATA SSD signal to M.2 NGFF 67pin Signal port

PCI Express M.2 Specification Revision 0.7, Version 1.0

PCI Express Mini Card Electromechanical Specification 1.2

SerialATA_Revision_3_2_Gold

Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket.

50mm Mini PCI-E mSATA SSD to SATA 7pin Hard Disk Drive PCBA Adapter MSATA testing PCB Tools

Support 50mm full size Msata Port.

You can test the mSATA port by SATA hard disk with this PCBA.

For testing only.

NGFF M.2 M-key NVME AHCI SSD to PCI-E 3.0 16x x4 Adapter for 110mm 80mm SSD

Features:

1.M key M.2 NGFF SSD to PCIe x16/X4 adapter.

2.The speed and other properties is not changed,only form conversion interface.

3.Support Type 2230/2242/2260/2280/22110 type M.2 Card dimension.

4.Transparent to the operating system and does not require any software drivers.

System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later

PCI-E 3.0 x4 to M.2 NGFF M Key SSD Nvme Card Adapter PCI Express

with Power Failure Protection 4.0F Super Capacitor

At the power failure occurrence time, it prevents data loss in the event of input power failure protection by using the on-board hold-up capacitor to provide supplemental power during that critical period when the data is fully saved into the flash memory.

With 12cm/9cm standard PCI bracket

With Cooling Fan

PCI Express 3.0 x4 Lane Host adapter

Supports PCIe Gen3 and PCIe Gen2 M.2 NGFF 80mm, 60mm, 42mm SSD

Supports PCIe 3.0, PCIe 2.0 motherboard

Compliant with PCI Express 3.0

Support M-key XP941 SM951 PM951 A110 m6e SSD

See belowing testing Speed rating.

System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later

Note: The adapter only work for M-key socket, cannot work for B-key or B/M-key socket.

PCI-E 3.0 x1 Lane to M.2 NGFF M-Key SSD Nvme AHCI PCI Express Host Adapter Converter Card

With 8cm/12cm standard PCI bracket and Low profile bracket.(Not included the SSD)

PCI Express 3.0 x1 Lane Host adapter

Supports PCIe Gen3 and PCIe Gen2 M-key M.2 NGFF 80mm, 60mm, 42mm SSD

Supports PCIe 3.0, PCIe 2.0 motherboard

Compliant with PCI Express 3.0

Support M-key XP941 SM951 PM951 A110 m6e SSD

System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later

Note: The adapter only work for M-key socket, cannot work for B-key or B/M-key socket.

System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later

M.2 NGFF M-Key NVME SSD Convertor Card for 2014 Macbook Mini A1347 MEGEN2 MEGEM2 MEGEQ2

The adapter can covert the NGFF M-key SSD to the 2014 Macbook Mini A1347 MEGEN2 MEGEM2 MEGEQ2 SSD.

Note: The Nvme SSD only work for Mac OS HiSierra.

Note: The adapter only work for M-key SSD, cannot work for B-key or B/M-key socket.

Compatibility With:

2014 Macbook Mini A1347 MEGEN2 MEGEM2 MEGEQ2

USB 3.0 to SATA 22pin 2.5" Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF mSATA SSD Adapter Converter

The item included one cable and one PCBA.

2.5" SATA SSD Form Factor : 98 x 65.5mm

M.2 (NGFF) mSATA to SATA III Module

Build in Mini PCI-e 52pin Female connector

Build in M.2 (NGFF) B key Female connector

Insert both M.2 mSATA SSD on the PCBA,M.2 SSD is the first priority. mSATA won't work.

Support SATA Reversion 3.2

PCI Express M.2 Spec. Revision 0.7, Version 1.0

PCI Express Mini Card Electromechanical Spec. 1.2

PWM synchronous buck converter Power IC

3A maximum output current

Short circuit protection

In-rush current suppression

Thermal shutdown protection

ESD HBM (Human Body Mode)/2KV

Note:

1. the MSATA and NGFF SSD cannot work at same time.

2.The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket.

USB 3.0 to SATA 2.5" Hard Disk to M.2 NGFF PCI-E 2 Lane SSD for E431 E531 X240 Y410P Y510

The item included one cable and one PCBA.

SATA III to M.2(NGFF) Storage adapter, providing one 7pin + 15pin power connector on the host connection and one 67pin B key M.2 connector on the SSD storage devices connections. When assembled, it can operate in a variety of operating systems. Such as DOS, Windows 95, 98, XP, 2000, Vista, Win 7, Linux, Unix, and so on.

Work for E431 E531 X240 Y410P Y510P M.2 NGFF PCI-E 2 LANE SSD

The adapter allows the installation of SSD as system disk, boot the operating system directly, without having to install any drivers, but does not affect the execution speed of the SSD storage devices.

Fully compliant with SATA revision 3.1

Fully compliant with PCI Express M.2 Specification Version 1.0

PWM Power IC / 1.4MHz 5.5V synchronous buck converter

M.2 SSD input voltage: 3.3V , input max. current: 3A

Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket.

The mini PCI-E extender is designed to minimize the signal degradation effects of the extender by proven design techniques.

The mini PCI-e Extender is a debug and test tool.

Also a powerful tool for engineers and factory tests.

Design the FFC (Flat Flexible Cable) cable for flexible use.

Not only for Full-size MiniCard adapter but also Half-size MiniCard by removing extra Full-size extensions.

E431 E531 X240 Y410P Y510P M.2 NGFF PCI-E 2 LANE SSD to 9.5mm 2.5" SATA 22pin hard disk case PCBA

SATA III to M.2(NGFF) Storage adapter, providing one 7+15pin connector on the host connection and one 67pin B key M.2 connector on the SSD storage devices connections. When assembled, it can operate in a variety of operating systems. Such as DOS, Windows 95, 98, XP, 2000, Vista, Win 7, Linux, Unix, and so on.

Work for E431 E531 X240 Y410P Y510P M.2 NGFF PCI-E 2 LANE SSD

The adapter allows the installation of SSD as system disk, boot the operating system directly, without having to install any drivers, but does not affect the execution speed of the SSD storage devices.

Fully compliant with SATA revision 3.1

Fully compliant with PCI Express M.2 Specification Version 1.0

PWM Power IC / 1.4MHz 5.5V synchronous buck converter

M.2 SSD input voltage: 3.3V , input max. current: 3A

Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket.

2 in 1 Combo M.2 NGFF B-key mSATA SSD to SATA 3.0 Adapter Converter Case Enclosure

the MSATA and NGFF SSD cannot work at same time.

The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket.

Insert both M.2 mSATA SSD on the PCBA,M.2/NGFF SSD is the first priority. mSATA won't work.

Support SATA Reversion 3.2

Support DC 3.3v MSATA/NGFF SSD.

3x5cm mSATA Adapter to 3x7cm Mini PCI-e SATA SSD for Asus Eee PC 1000 S101 900 901 900A T91

Alow mSATA SSD to work as mini PCIe SATA SSD in ASUS EEE PC 900/900A/901 laptop

Designed for Asus Mini PCI-e SATA Pin-out only,not support mini PCIe PATA or mSATA interface.

Only support mSATA 30x50mm SSD.

PCB dimension: 70x32x5mm

No need driver ,plug and play

please note:

SSD began to work after updating the version of BIOS with the file 900-ASUS-1006.ROM from 19.03.2009.

To update the version of BIOS, you need to find and download the file "900-ASUS-1006.zip", unpack it, get the file "900-ASUS- 1006.ROM "rename to" 900.ROM "write to the root of any flash drive or CD-card, insert into the computer and at startup, instead of entering Setap about F2, press Ait-F2.

At the same time, the program will start, which will find the file "900.ROM" and reinstall DIUS.

It's not instantaneous, wait until the reinstallation is complete. After that, the computer will boot from the new MSATA SSD

Mini PCI-E mSATA to USB 2.0 External SSD PCBA Conveter Adapter Card without Case

Create your own blazing fast external SSD with this USB 2.0 mSATA SSD.

An USB 2.0 external SSD offers incredible performance far beyond that of a USB 2.0 flash drive.

Features and Specifications

Fits 50mm standard size mSATA drives

Max out the USB 2.0 bus, real world speeds can top 480Mbps.

Small and portable

Note: This adapter is only compatible with MSATA connector.

Mini PCI-E mSATA to USB 3.0 External SSD PCBA Conveter Adapter Card

Create your own blazing fast external SSD with this USB 3.0 mSATA SSD.

A USB 3.0 external SSD offers incredible performance far beyond that of a USB 3.0 flash drive.

Features and Specifications

Fits 1.8" (standard size) mSATA drives

Max out the USB 3.0 bus, real world speeds can top 200 MB/s

Small and portable

Note: This adapter is only compatible with MSATA connector. Not compatible with 50mm Mini PCI-e SATA and Mini PCI-e PATA.

PCI Express PCI-E 1X to 12+16Pin 2013-2017 Mac Pro Air SSD Convert Card for A1493 A1502 A1465 A1466

With Standard PCI Back Bracket

Single-lane (x1) PCI Express throughput rates up to 5 Gbps

Support Windows 10 or later

The SSD is not included.

Compatibility With:

2013 Macbook Pro A1493 A1502 ( MD864 MD865 MD293 Md294) SSD

2013 MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD

2013 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD

2015 MacBook Pro retina A1502 A1398(MF839 MF840 MF841 MGXA2 MGXC2) SSD

2015 MacBook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878 SSD


Note:

The SSD must be 16+12pin contacts.(see belowing photo,otherwise it cannot work)




System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later

NGFF M-key NVME AHCI SSD to PCI-E 3.0 1x x1 Vertical Adapter

with 18-20cm PCI-E 1X Cable Male to Female Extension

M key M.2 NGFF SSD to PCIe X1 adapter.Support Type 2230/2242/2260/2280 type M.2 Card dimension.

The speed and other properties is not changed,only form conversion interface. Transparent to the operating system and does not require any software drivers.

System requirement: Z97 or later Motherboard+Windows 10 OS or later

PCI Express PCI-E to 2013 Apple Macbook Pro Air SSD Convert Card for A1493 A1502 A1465 A1466

With Standard PCI Back Bracket

Single-lane (x4) PCI Express throughput rates up to 5 Gbps

Support Windows 10 or later

The SSD is not included.

Compatibility With:

2013 Macbook Pro A1493 A1502 ( MD864 MD865 MD293 Md294) SSD

2013 MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD

2013 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD

2014 MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD

2015 MacBook Pro retina A1502 A1398(MF839 MF840 MF841 MGXA2 MGXC2) SSD

2015 MacBook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878 SSD


Note:

The SSD must be 16+12pin contacts.(see belowing photo,otherwise it cannot work)




System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later

2 in 1 Combo M.2 NGFF B-key mSATA SSD to SATA 3.0 Adapter Converter Case Enclosure

the MSATA and NGFF SSD cannot work at same time. You need use the switch to convert it.

The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket.

Insert both M.2 mSATA SSD on the PCBA,M.2/NGFF SSD is the first priority. mSATA won't work.

Support SATA Reversion 3.2

Support DC 3.3v MSATA/NGFF SSD.

NGFF M-key NVME AHCI SSD to PCI-E 3.0 1x x1 Vertical Adapter for XP941 SM951 PM951 960 EVO SSD

Features:

1.M key M.2 NGFF SSD to PCIe X1 adapter.

2.The speed and other properties is not changed,only form conversion interface.

3.Support Type 2230/2242/2260/2280 type M.2 Card dimension.

4.Transparent to the operating system and does not require any software drivers.

System requirement:

1.Motherboard: Z97 or later

2.Windows 10 or later